Fixed
MULTIPLE Street know along Radley Road not working
Reported via iOS in the Lamp Out of Light category anonymously at 22:41, Wed 27 April 2022
Sent to Oxfordshire County Council less than a minute later
All of the street lamps on the Western side of Radley Road from Kennet Road to The Chestnuts are not working - no light at all, oddly the ones on the Eastern side do work. The last photo is opposite The Chestnuts - no 18A.
Council ref: 3487835
Updates
-
SUPPLY FAULT - Passed to SSE (Energy Supplier)
When our street lighting contractor previously attended site it was confirmed that there was a fault with the electricity supply to that lights rather than within the lights themselves, this fault has been reported to the Local District Network Operator (LDNO) by ourselves.
In much the same way as a typical household, Oxfordshire County Council is responsible only for the street light, but not for the electrical infrastructure outside of its own asset, the cabling serving street lights is provided and maintained by the LDNO; these are outside of the local authority control and subject to a separate regulatory framework overseen by ofgem.
Oxfordshire County Council’s contractor is not permitted in any way to interfere with or try to repair electricity supply faults, as they would be in breach of the statutory safety regulations if they tried to do so.
Once the electricity supply company advises Oxfordshire County Council the fault is rectified we will confirm this within our regular inspection programme to ensure that the light as a whole is in working order.
Posted by Oxfordshire County Council at 09:11, Mon 5 September 2022
-
Oxfordshire County Council wishes to apologise for the delay in a response. Due to the timescale since this was reported we have closed this report down. Please can you confirm if it is still an issue by creating a new report on Fix My Street.
State changed to: Fixed
Posted by Oxfordshire County Council at 07:36, Friday 3 April 2026
This report is now closed to updates from the public. You can make a new report in the same location.