Drain is significantly lower than road surface
Reported via mobile in the Pothole category anonymously at 14:40, Sat 30 October 2021
Sent to Oxfordshire County Council less than a minute later
Recent resurfacing has been poorly done. Drain is dangerously lower as surface has been built higher than drain. It's so low its jolts the car badly and I've seen a cyclists close to falling. Not acceptable needs to be fixed.
Council ref: ENQ21908831
Thank you for your enquiry. This issue has been passed onto the relevant team for investigation.
State changed to: Investigating
Posted by Oxfordshire County Council at 14:40, Sat 30 October 2021
I came here to log this too. It's really disappointing after the whole road has just been done that this was left in this way, which is probably worse than it was originally tbh. If you're not able to go around (which you mostly can't due to the heavy traffic flow down this road) cars have to slow to 10-15 mph to avoid severely jolting the near-side wheel as it smashes into the dip, and so you get the cars behind braking hard because they're not anticipating it. Really dangerous.
Posted anonymously at 12:23, Thu 25 November 2021
Still nothing has been done
Posted anonymously at 18:42, Sunday 13 February 2022
Thank you for you enquiry regarding the gully level. During a site meeting prior to the recent road repairs it was noted the gully level was lower than ideal however adjusting it would cause a large puddle to form in the adjacent junction. It was therefore left at it's current level. Any adjustment of the gully cover level will need to go hand in hand with moving the whole gully and chamber across towards the kerb to avoid a larger puddle forming. This request can be added to the list for drainage works sometime in the future , however it is unlikely to feature in the short term programme of works due to our current list of higher priority work.
State changed to: Investigation complete
Posted by Oxfordshire County Council at 10:26, Thursday 26 May 2022
This report is now closed to updates. You can make a new report in the same location.