Back to all reports

The new traffic enforcemnet camera and spikey guard damaged

Reported via desktop in the Road Traffic Signs and Road Markings category anonymously at 19:53, Monday 1 March 2021

Sent to Oxfordshire County Council less than a minute later

Photo of this report zoom
Photo of this report zoom

The brand new traffic enforcement camera has been misaligned, the protective spikes damaged and the top section of pole bent/misaligned. The camera will probably now miss any vehicle travelling through illegally (but depends on how wide angle the camera lens is). It looks at though this was caused by a reversing/manouvering tall vehicle - may need an extra bollard to prevent reoccurence? This is a different report about damaged/misaligned signs reported previously (November?), as that report referred to the previous pre camera signs.

Council ref: ENQ21888979

RSS feed of updates to this problem Receive email when updates are left on this problem.

Updates

  • Thank you for your enquiry. This issue has been passed onto the relevant team for investigation.

    State changed to: Investigating

    Posted by Oxfordshire County Council at 19:54, Monday 1 March 2021

  • Thank you for your report. Unfortunately the damage has been caused by an unknown vehicle. We have arranged for the repairs to be completed this month ready for the bollards to go operational again in April. I have marked the report as fixed as repairs have been arranged. Keith Stenning

    State changed to: Fixed

    Posted by Oxfordshire County Council at 14:42, Tuesday 2 March 2021

  • .

    State changed to: Investigation complete

    Posted by Oxfordshire County Council at 08:28, Wednesday 10 March 2021

This report is now closed to updates. You can make a new report in the same location.