Back to all reports

Request for bollards on boundary corner

Reported via desktop in the Road Traffic Signs and Road Markings category by Oxfordshire County Council at 09:05, Fri 13 November 2020

Sent to Oxfordshire County Council less than a minute later

Photo of this report zoom

Redact

Photo of this report zoom

Redact

Photo of this report zoom

Redact

This is a very sharp corner, on a very narrow road, and unsuitable for large vehicles. On 2 occasions, large vehicles have collided with the boundary wall while trying to navigate this corner. In April 2016, the wall was damaged and had to be rebuilt. In February 2020, there was another collision with this boundary wall, causing severe damages to the wall and railings. The wall collapsed a few days later and is currently being rebuilt. Is it possible to erect bollards on the boundary corner/verge to stop this from happening.

Council ref: ENQ20880424

RSS feed of updates to this problem Receive email when updates are left on this problem.

Updates

  • Thank you for your enquiry. This issue has been passed onto the relevant team for investigation.

    State changed to: Investigating

    Posted by Oxfordshire County Council at 09:05, Fri 13 November 2020

  • Photo of this report zoom

    Redact

    Photo of this report zoom

    Redact

    Please would you also put bollards on the opposite corners as the large vehicles regularly swing round and hit the telegraph pole on the verge, which is now leaning! The wall on the diagonal has also been hit by the bus and regularly by cars travelling too fast and too close. This is a dangerous T junction. There are cyclists and pedestrians who use this regularly at their peril.

    Posted anonymously at 12:09, Wed 25 November 2020

Provide an update

Your information will only be used in accordance with our privacy policy

Next: Tell us about you

or No personal details will be stored, and you will not receive updates about this report.

Your update

Tell us about you

Do you have a FixMyStreet password?