You can move around with your keyboard
plus
minus
left
right
Drop pin on the map to start a new report
space
Press space again to adjust the location
space
Start new report here Reposition report here
Back to all reports

The pavement is unfinished and dangerous for pedestrians

Reported in the Footways and Pavement damage category anonymously at 16:44, Wed 9 September 2020

Sent to Oxfordshire County Council less than a minute later

All along this stretch the pavement was dug up and has been left unfinished now for at least three weeks. All the ironworks are raised and there are no warning signs or anything to suggest the roadworks are on going. It has left this stretch of footpath (well used by school children and people of all ages,) dangerous.

Council ref: ENQ20875811

RSS feed of updates to this problem Receive email when updates are left on this problem.

Updates

  • Thank you for your enquiry. This issue has been passed onto the relevant team for investigation.

    State changed to: Investigating

    Posted by Oxfordshire County Council at 16:44, Wed 9 September 2020

  • I walk this path everyday and it has been like it for two months now. Even worse at night as surface uneven and drains are raised above pavement level, a real trip hazard ! - lighting is very poor.

    Also this stretch of pavement is nearly always covered in mud from contractors digging next to half done Path and barriers are often left lying across Path making it impassable for many people and mean you have to step into the road. Given this is main route to King Alfreds school and lots of children it is totally unacceptable it has been like this for so long now

    Posted anonymously at 20:01, Thu 8 October 2020

  • Apologies for the delay in response. Due to the length of time since it was reported please can you confirm if it is still an issue by creating another report on Fix My Street.

    State changed to: Investigation complete

    Posted by Oxfordshire County Council at 17:49, Tue 31 October 2023

This report is now closed to updates from the public. You can make a new report in the same location.