Back to all reports

Incorrect speed signs

Reported in the Road Traffic Signs and Road Markings category anonymously at 11:20, Tue 7 July 2020

Sent to Oxfordshire County Council less than a minute later

Photo of this report zoom
Photo of this report zoom

The Temporary Speed reduction have been adjusted however, they are still incorrect. The sign for the start of the 50mph area near the Benson Lane junction has been bagged and rotated with the national speed limit sign which is mounted back to back on the same pole. The 50mph sign needs to be rotated back into position and ONLY the national speed limit sign covered over (bagged). The temporary national speed limit sign which has been place within the 50mph area need to be removed. The long grass in front of the temporary 30mph sign also could do with being strimmed back to make these signs clearly visible. Someone need to review the drawing of the Temporary Traffic Order at the Benson Lane junction and place the correct signs.

Council ref: ENQ20869826

RSS feed of updates to this problem Receive email when updates are left on this problem.

Updates

  • Thank you for your enquiry. This issue has been passed onto the relevant team for investigation.

    State changed to: Investigating

    Posted by Oxfordshire County Council at 11:21, Tue 7 July 2020

  • With the junction with Benson Lane and the A4074 ( north end) there is a road repair which has sunk badly, right across the road. I think this needs filling in

    Posted anonymously at 02:33, Tue 6 October 2020

Provide an update

Your information will only be used in accordance with our privacy policy

Next: Tell us about you

or No personal details will be stored, and you will not receive updates about this report.

Your update

Tell us about you

Do you have a FixMyStreet password?