Back to all reports

Street light not working

Reported in the Street lighting category anonymously at 17:41, Thu 13 February 2020

Sent to Oxfordshire County Council 4 minutes later

Street light at this location has not be working for the last two nights.

RSS feed of updates to this problem Receive email when updates are left on this problem.


  • Thank you for your report, to enable us to log the fault to the correct unit can you please advise using the attached map the street light number you are referring to. If the unit is not on the map this would not be owned/maintained by Oxfordshire County Council and would need to be reported to the developer/landowner direct. Unfortunately we do not keep records of private lights.

    Posted by Oxfordshire County Council at 15:56, Fri 14 February 2020

  • There is a number 6 halfway up the light. I assume this is the number you require. There is a very faded notice lower down which says to report any faults to Oxfordshire County Council so I assume you are responsible for this light.

    Posted anonymously at 16:15, Fri 14 February 2020

  • Ref: 00367863 Thank you for your report, OCC are now responding to out of lights within the contracted timescales of attending site within 7 working days for repairs. If there is a cable fault this will be passed to the Electricity company to repair and will take longer, it will depend on the resources which the District Service Operator has. Thank you

    State changed to: Action scheduled

    Posted by Oxfordshire County Council at 15:10, Mon 17 February 2020

  • Thank you for fixing this so quickly.

    Posted anonymously at 11:38, Wed 19 February 2020

  • We believe this issue was addressed but due to a technical error it hasn't been updated on FixMyStreet. We now consider it fixed, but if the issue still exists please let us know by creating a new report on FixMyStreet:

    State changed to: Investigation complete

    Posted by Oxfordshire County Council at 14:55, Monday 10 May 2021

This report is now closed to updates. You can make a new report in the same location.