Back to all reports

Street lamps not working

Reported in the Street lighting category anonymously at 20:53, Wed 20 November 2019

Sent to Oxfordshire County Council 2 minutes later

The street lamps in Limborough Close are not working (both side of the road)

RSS feed of updates to this problem Receive email when updates are left on this problem.

Updates

  • Thank you for your report, to enable us to log the fault to the correct unit can you please advise using the attached map the street light number you are referring to. If the unit is not on the map this would not be owned/maintained by Oxfordshire County Council and would need to be reported to the developer/landowner direct. Unfortunately we do not keep records of private lights.

    State changed to: Investigating

    Posted by Oxfordshire County Council at 10:43, Thu 21 November 2019

  • Limbro' close (the concrete pole on the right Number "1". The one on the left side may be "Letcombe Mews" (in Limbro') Its a black steel post (no number) its the first one in the road on the left.

    Posted anonymously at 12:16, Thu 21 November 2019

  • Ref:00362795 Thank you for your report, OCC are now responding to out of lights within the contracted timescales of attending site within 7 days for repairs. If there is a cable fault this will be passed to the Electricity company to repair and will take longer, it will depend on the resources which the District Service Operator has.

    The second light you are referring to, the first one on the left is private and does not belong to the Oxfordshire county council.

    State changed to: Action scheduled

    Posted by Oxfordshire County Council at 14:26, Thu 21 November 2019

  • Thanks for using Fix My Street to record your problem. We are happy to report that your issue has now been addressed. If this is not the case and there is still an issue please report this via a NEW fix my street report. Thank you

    State changed to: Fixed

    Posted by Oxfordshire County Council at 14:14, Tue 16 June 2020

This report is now closed to updates. You can make a new report in the same location.