Back to all reports

Several street lights not working - opposite side of road to Florence Park.

Reported in the Street lighting category anonymously at 12:33, Fri 18 January 2019

Sent to Oxfordshire County Council 2 minutes later

At least 2 street lights out. V dark when cycling here I nearly crashed into the traffic calming pavements. Near the trees on side opp Florence Park. Sorry did not get the numbers!

RSS feed of updates to this problem Receive email when updates are left on this problem.


  • Photo of this report zoom


    Thank you for your report, to enable us to log the fault to the correct unit can you please advise using the attached map the street light number you are referring to. If the unit is not on the map this would not be owned/maintained by Oxfordshire County Council and would need to be reported to the developer/landowner direct. Unfortunately we do not keep records of private lights.

    State changed to: Investigating

    Posted by Oxfordshire County Council at 13:02, Fri 18 January 2019

  • OK - Checking on StreeetView it looks like it is not that the lights don't work. .The problem is trees shading the light that need a bit of a trim. The 2 streetlights are on Rymers Lane. Adjacent to Florence Park - near the railings right next to the park, but on Rymers Lane pavement. The problem is that the lamps are surrounded by trees at the edge of the park, so they are not fully shining on the road at the point where there are 2 traffic-calming pavements sticking out in the road. Sorry cannot get the lamp numbers as will not be going this way for a while.

    Posted anonymously at 15:22, Fri 18 January 2019

  • We believe this issue was addressed but due to a technical error it hasn't been updated on FixMyStreet. We now consider it fixed, but if the issue still exists please let us know by creating a new report on FixMyStreet:

    State changed to: Investigation complete

    Posted by Oxfordshire County Council at 14:55, Monday 10 May 2021

This report is now closed to updates. You can make a new report in the same location.