Back to all reports

Two street lights on grass area side by footpath not working

Reported in the Street lighting category anonymously at 21:27, Sun 6 January 2019

Sent to Oxfordshire County Council 3 minutes later

There are two street lights not working on Sandringham Road by the footpath crossing the grassed area between the entrance of Saxons Way and St Hildas Close.

RSS feed of updates to this problem Receive email when updates are left on this problem.


  • Thank you for your report, to enable us to log the fault to the correct unit can you please advise using the attached map the street light number you are referring to. If the unit is not on the map this would not be owned/maintained by Oxfordshire County Council and would need to be reported to the developer/landowner direct. Unfortunately we do not keep records of private lights.

    State changed to: Investigating

    Posted by Oxfordshire County Council at 15:29, Mon 7 January 2019

  • The two street lights which are not working are no 25 and no 26 facing Sandringham Road.

    Posted anonymously at 21:45, Tue 8 January 2019

  • Ref: 349610 Thank you for confirming; we have logged this as a fault on our management system. Our current policy is for our contractor to attend electrical & structural emergencies as a priority; these will be attended within a 24hr period. All other faults are logged on our management system, for efficiency, these are grouped by area and the date they were reported, and the contractor attends against a programmed of works based on this approach.

    State changed to: Action scheduled

    Posted by Oxfordshire County Council at 10:46, Wed 9 January 2019

  • Thanks for using Fix My Street to record your problem. We are happy to report that your issue has now been addressed. If this is not the case and there is still an issue please report this via a NEW fix my street report. Thank you

    State changed to: Fixed

    Posted by Oxfordshire County Council at 14:40, Wed 10 April 2019

This report is now closed to updates. You can make a new report in the same location.