Back to all reports

The street light in the alley between 59 and 60 Poryeay is not lit.Since the new led lights have been fitted it is noticeably darker by the garages at bottom of Portway. Can they please be adjusted a little brighter.you are very vulnerable out there whilst putting your car away in the dark.

Reported in the Street lighting category anonymously at 07:42, Thu 26 October 2017

Sent to Oxfordshire County Council 3 minutes later

One light not working Garage area too dark since the new LED lights have been fitted can you adjust them to a bit brighter please until day 1 am

RSS feed of updates to this problem Receive email when updates are left on this problem.

Updates

  • Thank you for your report, to enable us to log the fault to the correct unit, can you please advise using the attached map the unit number you are referring to. Thank you

    State changed to: Investigating

    Posted by Oxfordshire County Council at 09:12, Thu 26 October 2017

  • The street light is numbered P49

    Posted anonymously at 07:27, Mon 30 October 2017

  • Thank you for your report; we have logged this as a fault on our management system. Our current policy is for our contractor to attend electrical & structural emergencies as a priority; these will be attended within a 24hr period. All other faults are logged on our management system, for efficiency, these are grouped by area and the date they were reported, and the contractor attends against a programmed of works based on this approach.

    State changed to: Action scheduled

    Posted by Oxfordshire County Council at 12:45, Mon 30 October 2017

  • We believe this issue was addressed but due to a technical error it hasn’t been updated on FixMyStreet. We now consider it fixed, but if the issue still exists please let us know by creating a new report on FixMyStreet: https://fixmystreet.oxfordshire.gov.uk/

    State changed to: Investigation complete

    Posted by Oxfordshire County Council at 15:08, Wednesday 28 July 2021

This report is now closed to updates. You can make a new report in the same location.