Streetlight No 2 is faulty
Reported in the Street lighting category by Phil Pointer at 15:13, Tue 29 August 2017
Sent to Oxfordshire County Council 2 minutes later
Streetlight No 2 is not working and has been reported to you on 21/8/2017. Also 3 streetlights between Avon Crescent & Blythe Place are not working , this has been reported by telephone a few days before 21st. As 4 streetlights are not working around Avon Crescent it is extremely dark in this area!
Still open, via questionnaire, 16:42, Tue 26 September 2017
OCC does not have a contractor in place to address street lighting problems any more. They are using contractors on a fault by fault basis. Now they cannot get replacement lamps to fit these lights. We actually have 4 lights that are out around my house, three are waiting replacement lamps and one which was cut down by contractors because it was dangerous. This happened before I reported the other faults.
Posted by Phil Pointer at 16:42, Tue 26 September 2017
No 2 light is still not working meaning the pathway by the shrubbery that s intended to light is not lit 05.10.17
Posted by Elaine Whittaker at 18:27, Thu 5 October 2017
Still open, via questionnaire, 17:39, Tue 24 October 2017
They have actually "fixed" two streetlights by changing the light fittings to LED downlights. These are meant to be placed closer together. They have not fixed the streetlamp that has been cut down for safety reasons and they have cut down another streetlamp as well. This means that it is still very dark around Avon Crescent and it is getting darker earlier now!
Posted by Phil Pointer at 17:39, Tue 24 October 2017
We believe this issue was addressed but due to a technical error it hasn’t been updated on FixMyStreet. We now consider it fixed, but if the issue still exists please let us know by creating a new report on FixMyStreet: https://fixmystreet.oxfordshire.gov.uk a>.
State changed to: Investigation complete
Posted by Oxfordshire County Council at 15:51, Wed 9 December 2020
This report is now closed to updates. You can make a new report in the same location.